Charging and Battery Maintenance for Your E-Collar

Charging and Battery Maintenance for Your E-Collar

Introduction

Battery care is one of the most overlooked parts of e-collar ownership, and one of the easiest to get right once you know the basics. Every current E-Collar Technologies system we carry uses rechargeable lithium-polymer batteries, which are refreshingly low-maintenance compared with older chemistries.

Li-Polymer Care: Charge Whenever You Like

Li-Polymer batteries can be recharged whether fully drained or not. E-Collar Technologies' charging circuitry is specifically designed with no risk of overcharge or degradation from charging before a full discharge, so top up as often as you'd like without concern. There is no need to "train" the battery or run it flat first, that advice belongs to older chemistries and does not apply here.

Charging Basics

• Charge time: approximately 2 hours for a full charge
• Indicator lights: solid red during charging, turning green when fully charged
• Always use the charger specified by E-Collar Technologies for your model
• Avoid extreme heat, both when charging and in storage
• Never immerse the battery pack in water, regardless of the receiver's waterproof rating

Storage Between Seasons

If a system is going into storage for months, a hunting rig over the off-season, for instance, give it a full charge before it goes away and top it up periodically rather than leaving it flat for a long stretch. Storing at moderate temperatures rather than a hot garage or a freezing shed will do more for battery life than anything else.

When It's the Battery and When It Isn't

Two symptoms get confused constantly:

• Shorter run time between charges usually means the battery is genuinely ageing. Genuine Educator replacement batteries are user-serviceable on most models and far cheaper than a new system.
• Reduced range is more often a low charge, a hand resting on the antenna, or a bent antenna than a failing battery.

A frayed or intermittent charging cable also mimics a dead battery convincingly. Work through troubleshooting common e-collar issues before replacing anything.

Key Takeaways

• Every current system we carry uses Li-Polymer and can be charged at any time without harming battery wellbeing.
• Full charge time is roughly 2 hours.
• Charge before long-term storage and top up periodically; avoid extreme heat.
• Always use the manufacturer-specified charger for your model.
• Shorter run time points at the battery; lost range usually points at charge level or the antenna.

Browse chargers, batteries and replacement partsor the full E-Collar Technologies range.